Products
Paya Alloys manufactures both standard and custom aluminum alloys for a wide range of industries. Our product portfolio includes internationally recognized alloy grades as well as engineered alloys developed to meet specific customer requirements. In addition to aluminum ingot production, we provide aluminum recycling and alloy property recovery while maintaining strict quality standards. Backed by metallurgical expertise and advanced laboratory capabilities, we deliver material solutions tailored to every industrial application.
Below you will find the datasheets of Paya Alloys' aluminum alloy grades. Each datasheet includes an alloy overview, applications, chemical composition, and technical specifications.
A356.0-T6
Introduction
After stress-relief heat treatment, A356.0-T51 offers better dimensional stability compared to the F condition. This condition is suitable for parts requiring higher dimensional accuracy and stability.
Applications
- Precision automotive parts
- Industrial equipment
- Machinery parts
- Aluminum enclosures
Chemical Composition
| Al | سایر(مجموع) | سایر(هرکدام) | Ti | Zn | Cr | Mg | Mn | Cu | Fe | Si |
|---|---|---|---|---|---|---|---|---|---|---|
| Balance | <0.15% | <0.05% | <0.05% | <0.20% | — | 0.25–0.45% | <0.10% | <0.20% | <0.20% | 6.5–7.5% |
Physical Properties
| هدایت الکتریکی | هدایت حرارتی | مقاومت الکتریکی | چگالی | ضریب انبساط حرارتی | گرمای ویژه | دمای مذاب کامل | دمای انجماد | مدول برشی | مدول الاستیسیته |
|---|---|---|---|---|---|---|---|---|---|
| 29 %IACS | 117 W/m·K | 59.5 nΩ·m | 2.713 g/cm³ | 2.713 g/cm³ | 963 J/kg·K | 565 °C | 540 °C | 29.9 GPa | 73 GPa |
A356.0-F
معرفی
A356.۰-T6 رایج‌ترین وضعیت این آلیاژ است. عملیات محلول‌سازی و پیرسازی مصنوعی باعث افزایش چشمگیر استحکام مکانیکی شده و آن را برای قطعات حساس مهندسی مناسب می‌کند.
کاربردها
- قطعات خودرو
- صنایع هوافضا
- قطعات تحت تنش
- پوسته گیربکس
- قطعات سازه‌ای
ترکیب شیمیایی
| Al | سایر(مجموع) | سایر(هرکدام) | Ti | Zn | Cr | Mg | Mn | Cu | Fe | Si |
|---|---|---|---|---|---|---|---|---|---|---|
| Balance | <0.15% | <0.05% | <0.05% | <0.20% | — | 0.25–0.45% | <0.10% | <0.20% | <0.20% | 6.5–7.5% |
خواص فیزیکی
| هدایت الکتریکی | هدایت حرارتی | مقاومت الکتریکی | چگالی | ضریب انبساط حرارتی | گرمای ویژه | دمای مذاب کامل | دمای انجماد | مدول برشی | مدول الاستیسیته |
|---|---|---|---|---|---|---|---|---|---|
| 29 %IACS | 117 W/m·K | 59.5 nΩ·m | 2.713 g/cm³ | 2.713 g/cm³ | 963 J/kg·K | 565 °C | 540 °C | 29.9 GPa | 73 GPa |
A356.0-M
معرفی
A356.۰-T6 رایج‌ترین وضعیت این آلیاژ است. عملیات محلول‌سازی و پیرسازی مصنوعی باعث افزایش چشمگیر استحکام مکانیکی شده و آن را برای قطعات حساس مهندسی مناسب می‌کند.
کاربردها
- قطعات خودرو
- صنایع هوافضا
- قطعات تحت تنش
- پوسته گیربکس
- قطعات سازه‌ای
ترکیب شیمیایی
| Al | سایر(مجموع) | سایر(هرکدام) | Ti | Zn | Cr | Mg | Mn | Cu | Fe | Si |
|---|---|---|---|---|---|---|---|---|---|---|
| Balance | <0.15% | <0.05% | <0.05% | <0.20% | — | 0.25–0.45% | <0.10% | <0.20% | <0.20% | 6.5–7.5% |
خواص فیزیکی
| هدایت الکتریکی | هدایت حرارتی | مقاومت الکتریکی | چگالی | ضریب انبساط حرارتی | گرمای ویژه | دمای مذاب کامل | دمای انجماد | مدول برشی | مدول الاستیسیته |
|---|---|---|---|---|---|---|---|---|---|
| 29 %IACS | 117 W/m·K | 59.5 nΩ·m | 2.713 g/cm³ | 2.713 g/cm³ | 963 J/kg·K | 565 °C | 540 °C | 29.9 GPa | 73 GPa |
Tailor Made Alloys
Every industrial application has unique material requirements. Leveraging metallurgical expertise and alloy engineering capabilities, Paya Alloys develops and manufactures custom aluminum alloys tailored to the required mechanical properties, chemical composition, and technical specifications of each project. Our goal is to deliver engineered material solutions that enhance the performance, quality, and efficiency of your products.
01 Consultation
Share your project requirements, application, and desired material properties with our engineering team. We will recommend the most suitable alloy solution for your needs.
02 Technical Review
Our engineers evaluate your technical requirements, operating conditions, and production needs to define the optimum alloy specifications.
03 Alloy Design & Validation
The alloy is engineered and, if required, a sample is produced. Chemical analysis and quality control tests are performed to validate that it meets the defined technical specifications.
04 Production
Once approved, the alloy is manufactured according to the defined specifications under strict quality control to ensure consistent quality and performance.
Recycled Alloys
Paya Alloys provides aluminum alloy recycling and material recovery services while maintaining high quality and technical performance. Through our automated recycling line, aluminum scrap and production returns are analyzed, sorted, and reprocessed into standard or custom alloy ingots. This process reduces raw material costs while improving quality control, resource efficiency, and sustainable manufacturing.
Data Sheet & Catalog
Paya Alloy offers a wide range of standard and custom alloys tailored to each client’s specific requirements. With advanced technology and strict quality control, we meet every industrial demand. At Paya Alloy, there are no limits — from design to production, every alloy is made exactly to your needs.
Click to see the product catalog and datasheet.
